THE MOST REALISTIC & AFFORDABLE CESSNA 172 FULL MOTION G1000 FLIGHT SIMULATOR
The TRC6000 FULL MOTION C172G resembles the inside of a Cessna 172 exactly. All inside measurments are exactly the same as in a real Cessna 172. This makes the TRC6000 FULL MOTION C172G flight simulator not only a perfect training device, but also the best procedure training aid available.
When entering the TRC6000 FULL MOTION C172G, the student will step into an actual aircraft, with all instruments, knobs and controls on the location where you should expect them, instead of a generic cockpit with a panel that doesn’t resemble an actual plane. The resemblance between the real aircraft and the TRC6000 FULL MOTION C172G is so striking, that you can hardly tell the difference between the both of them. Instead of making use of LCD screens to project the instruments behind holes in a panel, the TRC6000 FULL MOTION C172G contains real instruments that behave and can be controlled exactly like in the real aircraft. The TRC6000 FULL MOTION C172G teaches the student to operate an aircraft, rather than a flight simulator.
The TRC6000 FULL MOTION C172G is a full replica of a Cessna 172NG. It comes with real replicated instruments, instead of projected instruments behind a panel with just some holes. Even the TRC1000 units work exactly like the real Garmin G1000. It is very difficult to tell the difference between the inside of a real Cessna 172 and the inside of theTRC6000 FULL MOTION C172G.
The TRC6000 FULL MOTION C172G comes as a complete package, so you are ready to start educating your students. Everything is included in this 6DOF Full Motion system, from an incredible 7 channel (55 inch, Full HD per channel) High Resolution visual system for an immersive view directly from your cockpit, to an instructor station desk, including software to keep track of the progress of your students.
The panel of the TRC6000 FULL MOTION C172G is exactly the same as the panel of the TRC2000 DESK C172G. The dual yoke and rudder pedals are fully control loaded (up to EASA FNPT II requirements).
The TRC6000 FULL MOTION C172G cabin looks and feels like an actual aircraft. All dimensions, including the location of the instruments on the panel, are exactly like a real Cessna 172. This also makes it a perfect procedure trainer.
The 270 degrees field of view visual system with seven Full HD 55 inch professional DLED IPS video wall screens connected together with an ultra narrow bezel (3 millimeters visual to visual). These screens are specifically designed to be in use 24/7. The typical panel life time is at least 60.000 hours. The response time of these screens is 12 ms, causing no delay in visual and flight experience and the screen brightness is 500cd/m2. While the TRC 472FG comes with a 180 degrees visual system, the setup, is still very compact.
The instructor station desk, including 2 monitors will give you full control of the TRC 472FA Static Flight Simulator. You can control the aircraft, the weather, the position of the aircraft, engine failures and much more. It is also possible to keep track of the progress of your students using our own instructor software that is included in the package.
The TRC 472FA Flight Simulator comes with a high-end computer system to run the flight simulator software. The system is built with the latest specification processor, graphic card, memory and solid state disc. Each visual channel had it’s own image generating computer system. An instructor station computer is also included.
In addition to the standard instructor station software, the system also comes with our own instructor software to keep track of the progress of your students.
The 6DOF Motion Platform will give your students the most spectacular and immersive training experience available for general aviation
Final price depends on the configuration of the system and shipping location. Contact us for more information about the possibilities.
The TRC6000 FULL MOTION C172G is based on the dimensions and layout of a Cessna 172 production single engine aircraft. This closely represents the overall functionality, performance, avionics, and instrumentation. The platform consists of a cockpit section with motion, instructor’s control station, visual display system and an audio system. It incorporates a combination of hardware and software components that is assembled and checked by TRC Simulators. All hardware elements are permanently installed and designed so the cockpit has the appearance and feel of an actual aircraft. From the pilot’s seated position, There are no computer hardware elements such as keyboards, pointing devices, etc. for his or her use.
The TRC6000 FULL MOTION C172G provides realistic and true-to-scale cockpit design, avionics, and reliable hardware/software performance. This platform also provides an effective training environment for student and certificated pilots. This includes the capability of practicing scenario based flight training events, simulated equipment failure and emergency procedures, pilot evaluations, instrument procedures/ experience, and facilitating increased pilot proficiency overall.
Immersive 7 Channel visual system
The 270 degrees field of view visual system with seven Full HD 55 inch professional DLED IPS video wall screens connected together with an ultra narrow bezel (3 millimeters visual to visual) creates an incredible immersive view that let you believe you are actually flying.. These screens are specifically designed to be in use 24/7. The typical panel life time is at least 60.000 hours. The response time of these screens is 12 ms, causing no delay in visual and flight experience and the screen brightness is 500cd/m2. While the TRC6000 FULL MOTION C172G comes with a 270 degrees visual system, the setup, is still very compact.
EXTREMELY HIGH RESOLUTION
OCTAGON VISUAL SYSTEM
The TRC6000 FULL MOTION C172G comes with a fully equipped instructor station. This instructor station makes if extremely easy for the instructor to control the simulation’s environment, change the weather, reposition the student’s aircraft, and trigger malfunctions in real time as the simulation is running. It gives professional-quality tools for monitoring, instruction, and analysis. The possibility to record the current flight, makes it very easy for the instructor to review the flight with the student and discuss what he is doing right or wrong.
Easy to place anywhere
Because of the compact size of the TRC6000 FULL MOTION C172G, it will fit in any standard office environment and there is no need for a special air conditioning system, as the complete system has a relatively low power consumption. One 110/220v power socket will do for the complete system. You don’t need to change your electrical infrastructure, just for one flight simulator system.
6DOF Motion System
Compact sized and single phase mains powered Motion System. High-fidelity motion cueing and tuning algorithms for maximum performance level. Safety architecture, including an integrated ‘Return-to-Home’ function to handle critical failure situations and two emergency-off switches.
Control Loaded Dual Yoke and Dual Rudder Pedals
High fidelity control loaded dual yoke and dual rudder pedals system for most realistic flight experience. Simulated effects: engine, ground, turbulence, real trim, autopilot, stall etc. Real-time synchronization logic for dual-pilot cockpit with automatic pilot/co-pilot take-over.
Optional Integrated Instructor Station Hub Upgrade:
The TRC6000 FULL MOTION C172G comes including an instructor station desk. However, this instructor station desk is placed outside the enclosure of the motion system. To have a better view of your student’s progress, it is possible to upgrade the TRC6000 FULL MOTION C172G with an integrated instructor station hub behind the pilot seats within the enclosure. To be able to bear the extra weight of this integrated instructor station hub, a larger motion platform will also be added. The payload of this motion platform is 1500 kilograms.
TRC6000 FULL MOTION C172G in Action
In this video you can see the TRC6000 FULL MOTION C172G in action. It will give you an idea of the exact dimensions of the complete system.
The TRC6000 FULL MOTION C172G does not only come with Instructor Station software to control the aircraft, the weather, the position of the aircraft, engine failures and much more. It also comes with our own Instructor suite to control the gauges and instruments, but also to keep track of the progress of your students, including recorded flight, log books and much more to discuss the training progress with your students.
DETAILS OF THE MOTION SYSTEM
DETAILS OF THE CONTROL LOADING SYSTEM
It is recommended to have the availability of at least 4 power groups. The complete systems uses between 8000 and 9000 watt to run (depends on the final specifications).
Power supply requirements:
200-250 VAC Single Phase 47-63Hz
- group 1: instructor room – instructor pc
- group 2: simulator room – motion platform and motion pc
- group 3: simulator room – 3 simulation pc’s and cabin/enclosure
- group 4: simulator room – 4 simulation pc’s
270 DEGREES OCTAGON VISUAL SYSTEM:
Seven 65″ 4K LCD LED Screens, each powered by it’s own image generating computer system.
Double walled ABS Grade v0 flame retardant.
40mm aluminum profiles.
Powder coated sheet metal.
The floor thickness should be around 200mm concrete and the platform can be installed with Chemical anchors to absorb the reaction forces of the platform.
Length: 5.50 meters
Width: 4.50 meters
Height: 3.20 meters
- For Instructor and Classroom use
- 6DOF Full Motion Platform
- Instructor Station
- Mobile 65 inch 4K touch screen including floor lift on wheels
- Meets EASA FNPT II Requirements
- Control Loading on Yokes and Rudders
For more information about this system, or for a quotation, please contact our sales department via this contact form or via firstname.lastname@example.org.