TRC 472FGM 6DOF Flight Simulator System
Open the door and step in you own Cessna cockpit. Everything is included. A windshield, two doors with soft pads on the inside, carpeting on the floor and behind the seats, two adjustable seats. ceiling lighting, two fans for fresh air with adjustable nozzles, switches for lighting and fans and sockets for head sets (connection for head sets is in development at this moment). All you need to do is add your TRC 472 Flight Deck and you are ready to fly.
The TRC 472F Cabin is made of high quality, fire-retardant ABS and resembles the Cessna 172 fuselage. It’s designed in such a way, that it’s also possible to mount the cabin on a moving platform.
This system comes standard as hardware only, without computer system, visual and flight simulator software. If required we can also deliver this system with a complete 19″ rack computer system (PC for Flight Simulator software and PC for Instructoir station), a 180° visual system, Prepar3D 2.0 Flight Simulator software and Garmin G1000 Student Simulator Software and Virtual Instructor Station Pro (VISPRO) from Flight 1 Aviation Technologies. Contact our sales department for the possibilities.
TRC 472F Cabin
The TRC 472F Cabin is a full size fuselage to create a very realistic experience when flying in our professional Flight Simulator. The TRC 472F Cabin is made of high quality, fire-retardant ABS and resembles the Cessna 172 fuselage. It’s designed in such a way, that it’s also possible to mount the cabin on a moving platform.
Glass Cockpit version of the TRC 472 Flight Deck equipped with TRC 1000 units
TRC 472G Panel Glass Cockpit professional version
These panel parts are made out of 2 mm. (approx. 0.08″) aluminum, thereafter powder coated for extreme resistance against damages and printed with black for the lower part and white for legends. It contains all the cut-outs as for the TRC472 Glass Cockpit version
TRC 1000 Complete Glass Cockpit
TRC 1000 Glass Cockpit is a 100% scale replica of a popular Glass Cockpit System as found in many modern aircraft and consists of 1 PDF Display Unit with 800×600 screen, 1 MFD Display Unit with 800×600 screen and 1 Audio Panel. Each display unit comes with all buttons for a.o. the Autopilot in position. Even the VNV Key (Vertical Navigation Mode) is available.
Servo driven very precise replica of an aircraft gauge especially designed for flight simulation, used to indicate the Airspeed of an Airplane.
The USB Attitude Indicator is a very precise replica of an original artificial horizon and can be used in simulated cockpits for General Aviation.
The USB controlled Altimeter is a very precise replica of an original General Aviation Altimeter and has a double pressure scale for Inches (as used in the USA and UK) and millibar (as used a.o. in other countries in Europe).
Yoke System (2x)
The Yoke can turn left and right 90 degrees for a total of 180 degrees. The maximum movement in- and out is 170 mm.
Rudder Pedals with Proportional Brake System (2x)
An exact replica of the rudder pedals found in many aircraft. Produced from a stainless steel rudder system with die-cast aluminum rudder pedals (original aircraft parts) and a powder coated, 3 mm. thick stainless steel case. The proportional toe-brake system let you use the brake to control the aircraft when on the ground precisely.
smaller version of the original trim wheel as used in a.o. the Cessna 172 Skyhawk.
Flaps Switch and Position Indicator
The Flaps Switch and Indicator is a replica of the original Cessna 172/182 Flaps Switch and Indicator. The Flaps Switch has 4 positions: Flaps Up, Flaps 10 degrees, Flaps 20 degrees and Flaps 30 degrees.
The throttle is not a replica, but an original high quality throttle as used in light aircraft. (It is constructed according FAA regulations). The casing (from quality finished aluminum) has Teflon inner liner for low friction. Features stainless steel end fittings, swivel, and end rod. Furnished with FAA-style Black knob. Travel: 3-3/8″.
The mixture is not a replica, but an original high quality mixture as used in light aircraft. (It is constructed according FAA regulations). The casing (from quality finished aluminum) has Teflon inner liner for low friction. Features stainless steel end fittings, swivel, and end rod. Furnished with FAA-style Red knob and leaning possibility (fine tuning). Travel: 3-3/8″.
The Propeller Adjust is not a replica, but an original high quality mixture as used in light aircraft. (It is constructed according FAA regulations). The casing (from quality finished aluminum) has Teflon inner liner for low friction. Features stainless steel end fittings, swivel, and end rod. Furnished with FAA-style Blue knob and fine tuning possibility. Travel: 3-3/8″.
USB Controller for Throttle/Mixture/Prop
The USB Throttle Controller can be mounted with the Throttle, the Mixture and the Propeller adjust levers. It is ready to use and does not need any specific driver software since it is a so-called HID device and is recognized as a game controller.
Tank Switch and Fuel Switch Shut off
The Tank Switch is a replica of the original Cessna 172/182 Tank switch. It has 3 positions at 90 degrees each: Left, Both and Right and also included the “Fuel Switch Off” switch.
Key Lock Starter Switch
starter switch offering 5 positions: – OFF – RIGHT MAGNETO – LEFT MAGNETO – BOTH MAGNETO’s – START (spring returned to both position)
TRC 1000Switches Board
The PCB includes all switches and the connection for the Tank Switch, Fuel Switch-OFF and Handbrake, including light regulation for the panel instruments.
2 x 16 Circuit Breakers Set pro
Set of 16 real Aircraft Circuit Breakers including one USB controller to pop the Circuit Breakers when controlled via an Instructor Station.
The USB Hobbs Meter can be used to record elapsed time.
The USB Wet Compass is a precise replica of an original so-called wet compass as used in real aircraft.